Master and bus systems relieved, and in many cases a separate PLC is not required; the open and closed-loop control are realized directly in the drive.

The optional user-friendly OP1S operator panel guarantees fast and straight forward operator control. For example, when up-reading and downloading parameter sets online and offline. The four-line plain text display with 16 characters is clear and functional. The OP1S can be universally used for all ASI drive converters.

Today, you have access to a new interface to configure parallel circuits for redundant drive systems. The complete system will still function even if one or several drives fail.

All ASI units are already pre-configured in the factory. The equipment-specific parameters no longer have to be set, and the adaptation to the particular application (e.g. the load resistor for optimum current actual values or the terminating resistor for perfect communications) are also realized fully electronically using parameters. This means that they can be immediately used when service is required. ASI - the more cost-effective solution even before it goes into operation.

You can rejuvenate older DC solutions using the ASI CM unit. The Control Module permits a favorably-priced and efficient retrofit solution - no matter whether retrofitting or upgrading.

For us, it goes without saying that our products are internationally certified. SIMOREG products are fully compliant with the most important standards and regulations as standard - from the EN European Standard up to IEC/VDE. CE marking, UL, cUL and CSA certification make the ASI a real global player.